Bollisteel 4mm alpolic Stainless Steel composite in Australia

Bollisteel 4mm alpolic stainless steel composite in Australia

Bollisteel 4mm alpolic stainless steel composite in Australia is a 4mm stainless steel composite material with a non-combustible mineral-filled core, used as an exterior cladding and roof covering on new buildings and retrofit applications. Product compositionBollisteel 4mm alpolic stainless steel composite is composed of a non-combustible mineral-filled core sandwiched between two skins of 0.4mm thick stainless steel:

Composition of Bollisteel 4mm alpolic stainless steel composite in Australia:

Topside skin material: 0.4mm thick stainless steel, 304# / 316# or NSSC 220M stainless steel

Core material; Non-combustible mineral filled core

Backside skin material;0.4mm thick stainless steel, 304# / 316# or NSSC 220M stainless steel

(1) Processing method The machinability of 4mm alpolic stainless steel composite in Australia is low. Therefore, we need special machines and tools for cutting and grooving 4mm alpolic stainless steel composite panels. Use a square shear or a CNC router for cutting, and use a CNC router or a V-cut machine (planer) for grooving. Refer to the fabrication manual for details.

(2) Prevention of galvanic corrosion Stainless steel skin of the 4mm alpolic stainless steel composite belongs to the noble metal in corrosion potential. If dissimilar metals are used for assembling 4mm alpolic stainless steel composite panels, the corrosion of the less noble metal may be accelerated with galvanic corrosion under moist circumstances. Use stainless steel rivet and stainless steel bolt/nut for joining. Use stainless steel angle and flange for accessory, if possible. When aluminum extrusions are used for accessory, insulate the aluminum surface electrically with anodizing or coating.

(3) Color variation among production lots. It is possible that the color of 4mm alpolic stainless steel composite in Australia slightly varies among production lots and the inconsistent color is visible after installation. This is caused by the slight color difference between stainless steel coils. In order to prevent this problem, we recommend placing the total requirement of 4mm alpolic stainless steel composite in one order or allotting the panels with adequate grouping arrangement. 

Please have a look at our project references to have direct understanding how stunning effect that our Bollisteel 4mm alpolic stainless steel composite panel Australia can achieve. You can also visit our main website www.bolliya.com to more some more about our copper composite panel, titanium-zinc composite panel and aluminum composite panel.

Email us right away to get more information:  sales@bolliya.com